REMEMBER TO RIGHT CLICK AND RUN AS ADMINISTRATOR
I can absolutely tell you if you do not run as admin it will NOT work
DOWNLOAD IS AT THE BOTTOM OF THIS PAGE
this is a movement speed program I wrote with my newfound knowledge of being able to use a dll to read and write data to ff11 using python
1. extract the .exe
all the rar contains is the exe everything needed is packed in it
2. run as administrator
3. in the drop down menu of the program find your pol.exe
if you run multiple pol.exe's just remember the PID that shows up and make sure you pick the PID you want
4. pick a speed with the slider
5. press start when ready and stop when you want to turn off
0 is stuck in place 5 is about normal speed anything past 50 is very fast
be careful when using this program
you can pretty much use it anytime people are not around and in some linkshells that are fine with it you can use
this isn't tested for private servers but as long as the boot exe is named pol.exe (even if you change it along with all the other things(refrences in your private server code) that need to be changed for the pol.exe to boot your private server)
it should work
this was originally made for retail and it works for that
there's really no reason to have more movement speed programs there's plenty of them out there
I just wanted to release something with my newfound knowledge
oh and because I said I would add it
here's the code for the program
it's not perfect it can probably cleaned up quite a bit but it works
-upbeat
No comments:
Post a Comment